CPU-71-16

VMEbus SBC with 2nd Generation Intel® Core i7™

The CPU-71-16 is a high performance Single Board Computer (SBC) based on
the VMEbus 6U form factor. Offered in both convection cooled and ruggedized
conduction cooled variants, the CPU-71-16 will meet the needs of commercial
and military applications requiring maximum processing power, low power
consumption, and fully integrated single board computing.

HIGHTLIGHTS


  • Legacy VME or VME64 compatible
  • 2nd Generation Core i7
  • MIL-STD-810F versions
  • Convection and Conduction-cooled
  • RTM available for rear I/O support

APPLICATIONS


  • Defense
  • Homeland Security
  • Aerospace
  • Industrial
  • Transportation

At the heart of the CPU-71-16 is an Intel® 2nd Generation Core™ i7 ULV
Sandy Bridge Processor and QM67 Cougar Point Platform Controller Hub
(PCH). These two devices form the central processing backbone of the design.
With a dual-channel memory controller integrated in the processor, the CPU-
71-16 supports up to 8 GBytes of DDR3 SDRAM running at 1333 MHz. The
CPU-71-16 routes x8 gen 2 PCIe to an on-board XMC site.
One of the QM67 PCH’s x1 gen 2 PCIe is routed to a PCIe to PCI bridge. One
(PLX 8112) supports PCI bus for the two on-board PMC site and the Universe
IID VMEbus interface. Another x1 PCIe bus is routed to an Intel 82579
10/100/1000BaseT ethernet with front panel access.
A x4 PCIe interface is routed from the QM67 to an 82571EB dual 10/100/1000
BaseT, routed either to P0 in compliance with VITA 31.1 ethernet backplane
network or to P2.
Supports on board CFast (SATA) card for bootable storage.
Extended temperature and conduction cooled versions are available

VME Compatible – Tundra Universe IID PCI-VMEbus interface
provides VME64 compatibility and backward compatibility with
older VME backplanes.

High Perfomance and Low Power – Dual core processing
at less than 25W typical power consumption enables cool
operation at extended temperature.

Gigabit Ethernet – Three Ethernet ports are provided, one on the front and two on the rear, VITA 31.1 compatible.

MIL-STD Versions – The CPU-71-16 is offered in versions that
support wedge locks for high shock and vibration immunity,
and conduction-cooling. Conformal coating is available for all
versions.

CPU
• Intel® Core™ i7-2655LE / 2.2GHz, 25W
• Intel® Core™ i7-2610UE / 1.5GHz, 17W
Chipset
• Mobile Intel®QM67
Platform Controller Hub (PCH)
• Intel® Coug ar Point QM67 Platform Controller Hub
• PCI Express Base Specification, Revision 2.0
• Enhanced DMA controller, interrupt controller, and tim er functions
• Integrated 3G Serial ATA ATA ATA host controllers wi th independent DMA
• USB host interface wi th supp ort for eigh t USB ports
• System Management Bus (SMBus) Specification, Version 2.0 wi th additional
support for on-board I2C devices
• Supports Intel® Rapi d Storage Tech nology
• Supports Intel® Virtualization Tech nology for Directed I/O
• Supports buffered mode generating extra clocks from a clock chip
• Analog Display port (VGA)
• Firmw are Hub (FWH) interface
DRAM
• 4 or 8 GB DDR 3-ECC soldered memory
Ethernet
• 82579 BaseT single channel via x4 PCIe from PCH
• 82571EB BaseT dual channel via x4 PCIe from PCH
SMSC LPC4M10S7 Super I/O
• Dual COM ports support RS -232
• LPT interface
Non-Volatile Storage
• On-board connector for bootable high -speed CFAST
• 64Mbit EE PRO M on SPI bus for BIOS
PMC/XMC
• x8 PCI Express Bus from Processor to XMC site 1 (JN4 I/O tp P0)
• 32-bit, 33 MHz PCI bus available to both PMC/XMC sites
VME Rear I/O
• P0 VITA 31.1 compatible dual Gb Ethernet, PMC/XMC site 1 I/O, x1 SATA 3G, Digital video output (optiona), optional routing of SVGA
• P2 COM2, LPT, 3x USB 2.0, 2x SATA 3G, 2x 10/100/1000Base-T (if P0 not populated), PMC site 2 I/O
Front Panel I/O
• 10/100/1000 BaseT (RJ45 connnector), 2x USB 2.0, COM1 (DB9 connector), and high density DB15 VGA connector (alternate routing to P0 available)
• Optional PMC/XMCsite 1 I/O access
Miscellaneous
• On-board temperature monitoring via SMBus
Power Consumption
• Estimated +5V @ 5A (typ)
• Total Power: 25W (typ) based up on 2610UE processor
• Actual power depends on CPU 71-15 product configuration and XMC and USB loads
(Power consumption values subject to change without notice)
Form Factor
• 6U VMEbus
Rugged/Conduction-Cooled
• Available in conduction-cooled versions
• Optional wedge locks provide high shock and vibration immunity per MIL-STD-810F
• Convection and Conduction-cooled versions have conformal coating as an option
• Available in standard and extended operating temperature range
BIOS
• Phoenix SecureCore Tiano UEFI


© 2017 Dynatem
Back to top