DynaGATE 15-10

Transportation Gateway & Edge Controller

The DynaGATE 15-10 offers transportation companies a rugged and reliable gateway for data aggregation, on-board processing, and data transfer to make operations run smoothly, including functions such as routing, vehicle tracking, engine diagnostics and interfaces to on-board systems.


  • Designed for transportation, meeting
    demanding industry requirements
  • Intel® Gateway Solutions for the Internet
    of Things Ready
  • Remotely configurable, simplifying
  • Flexible, presenting wired and wireless
    connectivity options
  • High Level of Security & Encryption


  • Defense and Aerospace
  • Transportation and Mobility
  • Security and Surveillance
  • Industrial
  • Logistics and Networking

With multiple CANbus interfaces, ignition signal input control for on/off power function, and a 3-axis accelerometer, the DynaGATE 15-10 integrates specific capabilities necessary in the demanding transportation and automotive environments.

Operations teams can manage the DynaGATE 15-10 through the web interface for easy configuration or through the Remote Device Management function of the Everyware Device Cloud full M2M solution from Eurotech. Both options, either with the Everyware Cloud service or independent of it, make the DynaGATE 15-10 fast to deploy and upgrade over time.

While web configuration is similar to consumer gateway and router products, the design and ruggedization of the hardware means the DynaGATE 15-10 is built to withstand shock, vibration, dust and water penetration. Multiple certifications attest to the strength and longevity of the physical unit.

With integrated support for Cellular, Wi-Fi, GPS and 802.15.4/Zigbee, DynaGATE 15-10 provides a powerful combination of interfaces for a broad range of communication connectivity environments. In the facility, Wi-Fi or other near-range wireless options allow data transfer or configuration functions, while cellular and GPS options enable vital communication when vehicles are in motion.

Transportation – Shock and vibe tested, extended temperature operation and ignition switch power supply control make DynaGATE 15-10 ideal for rail, bus, trucking and other transportation applications

Seamless Integration – Builds upon integrated Quark processor hardware and software building blocks offered in Intel® Gateway Solutions for the Internet of Things (IoT), with Everyware Software Framework (ESF) support to extend capabilities further, including remote device management and Java programmability.

M2M and IoT (Internet of Things) Building Block – Ideally suited for M2M and Internet of Things applications to connect sensors, actuators and devices to the operations center for decision making based on real data. Native interface to Eurotech Everyware Device Cloud M2M integration platform for fast service development and deployment.

Intel® Quark SoC X1020D, 400Mhz

Single Rank – Memory Down, 512 MB, DDR3L-1600

SD Card
8 GB Class 4 MicroSD

8 MB SPI Boot Flash

3-axes, accelerometer

GPS – Yes
CELLULAR – Integrated via mPCIe Slot

USB 3x back panel USB 2.0 ports Host Ports 1x back panel USB 2.0 Device Port
ETHERNET 2x 10/100 Base-T Ports
1x per TI 83848 PHY
SERIAL 1 x RS232 Console
CAN 1 x CAN2.0B, up to 1 MB/s
1 x CAN2.0B, up to 250kbit/s
AUDIO Stereo Digital Mic Input
Stereo Analog Differential Mic Inputs
Stereo Line Out
INPUTS 8 channel LSADC back panel port

Power Supply
100 to 240 VAC, 47 to 63 Hz, and 12V DC, 0.4 Amp

Power Consumption
5W Max

OS Support
Yocto Linux, Intel Gateway Solutions for IoT ready

ESF Ready

EDC Ready

7.95” x 5.47” x 2.13” (L x W x H)

Operating Temperature
-40° to +80°C

Storage Temperature
-40° to +85°C ambient outside enclosure

0 to 95% Non-Condensing


© 2019 Dynatem
Back to top